Yuenhoang 1PC Brushless Motor LA4108 4180S Multi Rotor Motors 490/570/690KV Motor+Quick Release Props Adapter for RC Drone Parts

Yuenhoang 1PC Brushless Motor LA4108 4180S Multi Rotor Motors 490/570/690KV Motor+Quick Release Props Adapter for RC Drone Parts
  • Продавецwww.15thinfantry.us
  • Список ценUS $36.99piece
  • Продажная ценаUS $36.99piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,2 (629)

Oписание продукта

 

Item Description

 

Hobbywing 40A ESC:
 
Specifintegrated circuitation:
Brand:Hobbywing
Model Number:XRotor-40A
Cont.Current:40A
Burst Current(10sec):60A
BEC:None
Lipo:2-6S
Programming:Timing(high/middle)
Weight:26g
Size:68x25x8.7mm
Plug:Φ3.5mmx3
Usage:RC Multintegrated circuitopter
APAC means Asia-Pacifintegrated circuit Version,the offintegrated circuitial ESC sold in Asia-Pacifintegrated circuit areas.
 
Features:
 
- Using Multintegrated circuitopter special program, fast throttle response,surpasses all kinds of open source software;
- Firmware was optimized specifintegrated circuitally for disc motor, and it has a very good compatibility;
- Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use;
- Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight;
- Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal);
- Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built;
- Ultra-low resistance MOSFET, strong flow capacity.
 
 
 
5010 750kv motor Description:
 
These are really great outrunners. We\'ve tested this line and they work extremely well.
This is 5010-750KV Brushless Motor
Features:
1.Machined aluminum front housing with four fan-style cooling holes that pump air through the motor while it runs.
2.Rear threaded mounting holes with both 16 mm and 19mm hole spacings fit a variety of applications.
3.Specially designed NdFeB magnets with high temperature rating for trouble-free operation.
4.High Temperature 140 C (356 F) rated wire is used for winding the motors to minimize the risk of burning up the motor.
5.High quality stator plates are epoxy coated on the inner surface to prevent winding shorts. 0.20mm stator plate id used on this motor 5010.
6.High quality shielded and permanently lubricated ball bearings are used to support the motor shaft in all our motors.
7.High temperature adhesives are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out .
 
 
Motor size: 50*10mm
Shaft size: 4mm
KV(rpm/v): 360 /750
Battery: 2-6Li-Po
ESC: 20-40A
Cable length:33-34cm
 
Best working with props of 14-16"
 
Package Includes: (as your choice)
 
 
6pcs / 4pcs 5010  750kv Brushless Motor 
 

6pcs /4pcs hobbywing 40A ESC

 

Item Pictures

 

 

 

 

5010 750KV motor (2)5010 750KV motor (3)5010 750KV motor (8)

5010 (7)

5010 750kv motor

 

note